The condenser of the Condenser Manufacturer is a part of the refrigeration system. It is a kind of heat exchanger, which can convert gas or vapor into liquid and quickly transfer the heat in the tube to the air near the tube. The working process of the condenser is an exothermic process, so the temperature of the condenser is relatively high.

The role of the condenser is to exchange heat, which is simply to put the heat absorbed in the room outside through the condenser. The specific principle is: the high-temperature, high-pressure gas refrigerant discharged from the compressor works through the outdoor unit axial flow fan to take away the heat dissipation of the refrigerant in the condenser, and the refrigerant is cooled by the process of transforming from high temperature to normal temperature, that is, it becomes At room temperature, the process of transforming from gas to liquid, that is, it becomes liquid. However, the high-pressure pressure of the refrigerant after heat dissipation and condensation does not change, and the cooled refrigerant in the condenser is a normal temperature, high-pressure liquid.

Power plants use many condensers to condense the steam discharged from the turbine. Condensers are used in refrigeration plants to condense refrigerant vapors such as ammonia and freon. In the petrochemical industry, condensers are used to condense hydrocarbons and other chemical vapors. In the distillation process, the device that converts vapor to liquid is also called a condenser. All condensers operate by taking away the heat of gas or steam.

The general refrigeration principle of a refrigerator is that the compressor compresses the working fluid from low temperature and low-pressure gas into high temperature and high-pressure gas, and then condenses it into a medium temperature and high-pressure liquid through a condenser. After being throttled by a throttle valve, it becomes a low-temperature and low-pressure liquid. The low-temperature and low-pressure liquid working fluid is sent to the evaporator, absorbs heat, and evaporates in the evaporator to become low-temperature and low-pressure vapor, which is sent to the compressor again to complete the refrigeration cycle.